| Slant Six Forum https://slantsix.org/forum/ |
|
| New 7 1/4 Gears https://slantsix.org/forum/viewtopic.php?t=23321 |
Page 1 of 1 |
| Author: | TheOC1914 [ Thu May 24, 2007 5:09 am ] |
| Post subject: | New 7 1/4 Gears |
I have done some searchng on the internet and found some new 7 1/4 gears from a company called Motive Gear. Has anyone heard and/or dealt with these guys before? I am considerig ordering a ring and pinion set from them and I am looking for some feedback. |
|
| Author: | SlantSixDan [ Thu May 24, 2007 7:39 am ] |
| Post subject: | |
7¼" ring & pinion sets are still generally available from the major suppliers of rear axle rebuild parts, because the 7¼" was used up through '97 in base Dakotas. You can even get them right over the counter at the dealer, if you want to pay a lot. Generally they're all coming from the same place, and I'm fairly certain (but not 100% sure) that they're still American-made. |
|
| Author: | TheOC1914 [ Thu May 24, 2007 7:52 am ] |
| Post subject: | |
Thanks for the info Dan! |
|
| Author: | TheOC1914 [ Thu May 24, 2007 7:54 am ] |
| Post subject: | |
Are the gears sets available compatible with '65 a-body rear ends? |
|
| Author: | Jeffc [ Fri May 25, 2007 4:28 pm ] |
| Post subject: | |
and are the carriers compatable to the 60s and 70s axles? |
|
| Author: | Mister Twister [ Fri Jun 01, 2007 5:30 am ] |
| Post subject: | |
Hay tall just a little info, we have dealt with a Motivegear Performance very fast shippers! Wide range of stuff, nice product. Looked for a long time to find the gears for 8 3/4 741 case. All others suppliers 742 and 489 no problem oh Made in Italy Hope this helps Don |
|
| Author: | Rug_Trucker [ Sun Jun 03, 2007 6:31 am ] |
| Post subject: | |
Quote: Hay tall just a little info, we have dealt with a Motivegear Performance very fast shippers! Wide range of stuff, nice product. Looked for a long time to find the gears for 8 3/4 741 case. All others suppliers 742 and 489 no problem oh Made in Italy Hope this helps Don
Hopefully they don't make Fiat parts......... 
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|