I just get a piece of 5/16" all thread and make them any length I need.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Looking for source on carb studs https://slantsix.org/forum/viewtopic.php?t=23459 |
Page 1 of 1 |
| Author: | Bren67Cuda904 [ Sun Jun 03, 2007 7:34 pm ] |
| Post subject: | Looking for source on carb studs |
I have the offy 4 barrel intake and the carb studs are just long enough now, but I plan to add an insulator fiber plate under the carb and the studs will be to short. They are 5/16 fine thread on one end and course on the other. Humm, I might be able to pull them out of the spare engines manifold to head connection. |
|
| Author: | SlantSixDan [ Sun Jun 03, 2007 8:27 pm ] |
| Post subject: | |
Dorman sell 5/16" coarse-by-fine studs in multiple lengths. |
|
| Author: | Charrlie_S [ Mon Jun 04, 2007 5:44 am ] |
| Post subject: | |
Hardware store, or industrial supply store. I have a independent hardware store near me that has a great stock of nut, bolts, and studs. Also a supply house in Ocala, where I buy items like that, by the box. What length do you need? |
|
| Author: | slantzilla [ Mon Jun 04, 2007 6:49 am ] |
| Post subject: | |
I just get a piece of 5/16" all thread and make them any length I need.
|
|
| Author: | Bren67Cuda904 [ Mon Jun 04, 2007 9:19 am ] |
| Post subject: | |
I need 3" ones. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|