i got a carb kit from napa for my carb. and it didnt have any instruction.

wanted to know the measurements and any tips/hints for the rebuild.


i have the general idea i have rebuilt much smaller carbs (motorcycle/atv)

thanks

dario

_________________

The carb kits usually come with a fold-out sheet listing specs and measurements. Sounds like yours was missing. I haven't liked NAPA's kits for a few years...quality and parts count has been going down-down-down.

The specs you need will be in your factory service manual. You do have the factory service manual, right? I already sent you to this post, right?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

You should go back to NAPA and isist that they pull the instructions from another kit and make a copy, unless someone on here can post a copy.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.

i used the link and sent him an email today.

_________________

did so and they gave me a copy of instructions from another kit.



thanks

_________________