If you don't do any highway driving you should get along fine with the 4.10.
I drove one on the street with a 3.91 for years, highway and everything. Course, I'm a little more die hard than most I guess.
| Slant Six Forum https://slantsix.org/forum/ |
|
| rearend gearing https://slantsix.org/forum/viewtopic.php?t=23820 |
Page 1 of 1 |
| Author: | tarheelmopar [ Fri Jun 29, 2007 1:50 pm ] |
| Post subject: | rearend gearing |
I put a 4:11 rearend under my slant six and was wondering if I should go to a 3:55? I have upgraded the motor with a cam and dual carbs and such so it is pushing about 200 hp with the original body weight as it is a daily driver. |
|
| Author: | slantzilla [ Fri Jun 29, 2007 2:21 pm ] |
| Post subject: | |
If you don't do any highway driving you should get along fine with the 4.10. I drove one on the street with a 3.91 for years, highway and everything. Course, I'm a little more die hard than most I guess.
|
|
| Author: | sandy in BC [ Fri Jun 29, 2007 3:42 pm ] |
| Post subject: | |
Why not try the 4.11 and if it doesnt work out I bet you can make a low dollar swap/purchase to get 3.55s. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|