| Slant Six Forum https://slantsix.org/forum/ |
|
| Piston Needed https://slantsix.org/forum/viewtopic.php?t=2388 |
Page 1 of 1 |
| Author: | Wayne Triplett [ Wed Jul 11, 2001 7:19 pm ] |
| Post subject: | Piston Needed |
In urgent need of 60 over TRW piston. Need one. Please reply. jtrip2786@wilkes.net |
|
| Author: | Doctor Dodge (Doug Dutra) [ Wed Jul 11, 2001 7:30 pm ] |
| Post subject: | Re: Piston Needed |
Quote:
: In urgent need of 60 over TRW piston. Need one. : Please reply. Sorry, None in my "stash", I have some .040 o/s Ron Hamby was the last racer I knew of who chased down some of the last available .060s, he may have one. You may need to get some 198 rods and .5 mm o/s 2.2 pistons, then "dust" the block out to 3.465 DD |
|
| Author: | Wayne Triplett [ Wed Jul 11, 2001 7:35 pm ] |
| Post subject: | Re: Piston Needed |
I could probably use a 40 over because I ruined one cylinder and I'm having it sleeved. What is the price for one if I can use the 40 over? Thanks Quote:
: : Sorry, None in my "stash", I have : some .040 o/s : : Ron Hamby was the last racer I knew of who : chased down some of the last available : .060s, he may have one. : : You may need to get some 198 rods and .5 mm o/s : 2.2 pistons, then "dust" the block : out to 3.465 : DD jtrip2786@wilkes.net |
|
| Author: | Charles [ Thu Jul 12, 2001 7:34 pm ] |
| Post subject: | Re: Piston Needed |
Wayne: Talked to Ron Hamby tonight and he told me about your need for a piston. I am supposed to have 5 in my shop. The part number is a TRW L2125F. These are some pistons I used some time ago. I will let Ron know tomorrow if I have them & he can contact you. Charles Myers Quote:
: : In urgent need of 60 over TRW piston. Need one. : Please reply. jpm31@coastalnet.com |
|
| Author: | Charles [ Sun Jul 15, 2001 6:23 pm ] |
| Post subject: | Re: Piston Needed |
Quote:
: In urgent need of 60 over TRW piston. Need one. : Please reply. At last!!!! I have found them. Wayne, I have found the 5 pistons I told you about. They are the TRW L2125F .060. Let me know if you still need them. Charles jpm31@coastalnet.com |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|