| Slant Six Forum https://slantsix.org/forum/ |
|
| 727 Re -Usable Gasket and Bolts https://slantsix.org/forum/viewtopic.php?t=23890 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Wed Jul 04, 2007 10:29 am ] |
| Post subject: | 727 Re -Usable Gasket and Bolts |
Hey folks what is the part # for the 727 Re-Usable Gasket and part # for the special Bolts to use with it?? Anything else I should know before diving into theis project? I am going to Buy a new stock type pan as I think my old one is warped and streched. Thanks Greg |
|
| Author: | SlantSixDan [ Thu Jul 05, 2007 8:32 pm ] |
| Post subject: | |
The latest P/N I show for the 727 trans pan gasket is 2464 324AC. 727 bolt is 6036 402AA. 727 pan is 5211 8780AD. 727 pan magnet is 3681 601. |
|
| Author: | dakight [ Fri Jul 06, 2007 4:44 am ] |
| Post subject: | |
Will the gasket and pan for a 46RE fit a 727? They look the same in pictures but I haven't had occasion to actually compare them. |
|
| Author: | Greg Ondayko [ Sat Jul 07, 2007 8:22 pm ] |
| Post subject: | |
Thanks dan!! Are those Mopar Numbers for the dealer Part counter? Greg |
|
| Author: | SlantSixDan [ Sat Jul 07, 2007 8:31 pm ] |
| Post subject: | |
G.O.: Yes, dealer-only. D.K.: Yes. |
|
| Author: | Greg Ondayko [ Tue Jul 31, 2007 10:30 am ] |
| Post subject: | |
All is good on my once - leaky 727 I used the 2464 324AC Gasket - I got it From Rick Allison of A+A Transmission at a Race $15, 6036 402AA Bolts (set of 14) from my local Dealer - $11.90 for 14. These Bolts are longer for use with this gasket and Have A big washer on them too for this gasket Pan and Magnet I got a swap Meet for $15 No more Red tranny fluid on my garage floor!! Thanks, Greg |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|