| Slant Six Forum https://slantsix.org/forum/ |
|
| who's installed their Erson cam and driven it? https://slantsix.org/forum/viewtopic.php?t=24236 |
Page 1 of 1 |
| Author: | 64'4$peed [ Fri Jul 27, 2007 10:42 am ] |
| Post subject: | who's installed their Erson cam and driven it? |
I got a 270 in my new motor. It runs well but the timing curve is off. 1000-2000 RPMs is a little sluggish then feels like I got a turbo and the boost kicked in between 2000-4000 RPM. 2bbl carb, dutra duals, and some porting of the head. this is infront of a t5 and 3.91's. Any other Ersons running? |
|
| Author: | Bren67Cuda904 [ Fri Jul 27, 2007 11:20 am ] |
| Post subject: | |
I believe that cam has a 2000 -5000rpm range. |
|
| Author: | Doc [ Fri Jul 27, 2007 11:27 am ] |
| Post subject: | |
What is the static compression ratio of your engine? DD |
|
| Author: | 64'4$peed [ Fri Jul 27, 2007 12:43 pm ] |
| Post subject: | |
I figured it out a while ago. I cant remember exactly but its around 9-1 |
|
| Author: | Doctor Dodge [ Fri Jul 27, 2007 9:13 pm ] |
| Post subject: | |
Can you run a compression test and give us cranking compression in psi? DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|