I lost the transmission bolts that attach through the cross member bracket and through the frame. where can I get more?

Caesar

IIRC, they are 7/16"X1" coarse thread. Should be able to get some at any parts store.

_________________
Official Cookie and Mater Tormentor.

I think you are talking about the long bolts that pass through the crossmember and holds the mount to the torsion bar crossmember.
If this is the case,measure the width of the crossmember and diameter of the hole and go to your local hardware store or farm supply store and they should have what you need.
HyperValiant

_________________
1960 Hyper-Pac Valiant(rolling test-bed)
1963 Valiant V2OO(Son's summer project,- he just turned 15 )
1972 Valiant 4dr(Daughter Kelly's repair in progress)
1974 Valiant (v8) daughter Kelly's work in progress

Yea the bolt I was going to use as a reference I LOST!!! ARRGHH!!!
I will just measure tonight and go to home depot (i work there, so convenient as all hell) and get 4 of each thing, maybe 8 washers though.

Thanks,
Caesar

Sorry, I posted the trans mount to trans bolts.

Crossmember bolts are 1/2"X4" for the early A body and 3/8"X4" for the later A body. 4 each, but you can get away with 2.

_________________
Official Cookie and Mater Tormentor.

Saves weight on a race car.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225

Guess who's car I was under when I saw that?

_________________
Official Cookie and Mater Tormentor.