Folks,

After reading old threads this morning it dawned on me I might be tying to get a rocker arm oiling bolt I don't need. (In Parts Wanted) I am about to mount a rocker arm to a drool tube head and am missing the rear holddown bolt. I was remembering that bolt as a long one that was hollow. After reviewing old threads, in particularly terrylitlejohn's of Feb 19, it may be I remember wrong and all I need is a typical 3/8 bolt of right length. Is that correct?
thanks,
rock
'64d100

I have never seen a hollow rocker bolt. The peanut plug heads do use a rear bolt that is stepped down to 5/16".

My early heads all just used a longer 3/8" bolt.

_________________
Official Cookie and Mater Tormentor.

Yeah, what Slantzilla said.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225