I have never seen a hollow rocker bolt. The peanut plug heads do use a rear bolt that is stepped down to 5/16".
My early heads all just used a longer 3/8" bolt.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Hey, am I trying to get a rocker bolt I don't need? https://slantsix.org/forum/viewtopic.php?t=24636 |
Page 1 of 1 |
| Author: | rock [ Sun Aug 26, 2007 8:35 am ] |
| Post subject: | Hey, am I trying to get a rocker bolt I don't need? |
Folks, After reading old threads this morning it dawned on me I might be tying to get a rocker arm oiling bolt I don't need. (In Parts Wanted) I am about to mount a rocker arm to a drool tube head and am missing the rear holddown bolt. I was remembering that bolt as a long one that was hollow. After reviewing old threads, in particularly terrylitlejohn's of Feb 19, it may be I remember wrong and all I need is a typical 3/8 bolt of right length. Is that correct? thanks, rock '64d100 |
|
| Author: | slantzilla [ Sun Aug 26, 2007 8:44 am ] |
| Post subject: | |
I have never seen a hollow rocker bolt. The peanut plug heads do use a rear bolt that is stepped down to 5/16". My early heads all just used a longer 3/8" bolt.
|
|
| Author: | Charrlie_S [ Sun Aug 26, 2007 9:52 am ] |
| Post subject: | |
Quote: I have never seen a hollow rocker bolt. The peanut plug heads do use a rear bolt that is stepped down to 5/16".
Yeah, what Slantzilla said.
My early heads all just used a longer 3/8" bolt. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|