| Slant Six Forum https://slantsix.org/forum/ |
|
| 72 Dart Master Cylinder Q https://slantsix.org/forum/viewtopic.php?t=24684 |
Page 1 of 1 |
| Author: | shrt bus [ Wed Aug 29, 2007 7:44 am ] |
| Post subject: | 72 Dart Master Cylinder Q |
Doing a conversion on a 63 Valaint 200 (front disc) Put a 72 Dart MC on and curious to know if they came with a proportioning valve block or if the MC had in corporated.??? I cant seem to find any pictures that show a proportioning block in the motor area... Also.. Looking for an adapter for the rear line .. I cant tell what size the rear port is on the MC it appears to be (5/16"??) and need to reduce to a 3/16 line Any help with this would be greatly appreciated.. Rick |
|
| Author: | shrt bus [ Fri Aug 31, 2007 12:56 pm ] |
| Post subject: | |
found this to be very helpful and to have part #'s for adpaters: http://www.earlycuda.org/tech/dualmaster.htm |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|