| Slant Six Forum https://slantsix.org/forum/ |
|
| master cylinder size https://slantsix.org/forum/viewtopic.php?t=24749 |
Page 1 of 1 |
| Author: | moparDuster [ Sat Sep 01, 2007 4:37 pm ] |
| Post subject: | master cylinder size |
i bought a master cylinder awhile back on ebay 1573m. i got i but didn't know i had 9 inch rears at the time. now that the master cylinder's gone bad on the duster i need to change it out. the only thing is the one i have is for 10's all around how much of a difference can this make for the 9 inch rears my front has 10s. i was trying to hold out until i got all the parts for disks but i cant the brake pedal drops to the floor and i have a hard time stopping so i have to keep the drums on until i have all i need to do the change. |
|
| Author: | SlantSixDan [ Sat Sep 01, 2007 6:32 pm ] |
| Post subject: | |
Don't worry about it; 9" and 10" drum systems use the same-size master cylinder. |
|
| Author: | moparDuster [ Sun Sep 02, 2007 4:12 am ] |
| Post subject: | |
they look the same but when i look at rockauto and my parts store. the info say's that one is for 9's rears and the other is for 10 in rears. A-1 CARDONE Part # 101516M w/Drum Brakes w/Manual Brakes w/9" Rear Brakes "this is the one i have" A-1 CARDONE Part # 101573M w/Drum Brakes w/Manual Brakes w/10" Rear Brakes RAYBESTOS Part # MC36338 {Professional Grade Bore Size=15/16" Number of Ports=2 Primary Outlet Size=9/16x20 Secondary Outlet Size=1/2x20} Front Drum Brakes.. i really have to change it out soon i cant stop last night i was on the floor with the pedal the back tires were skidding and smoken but i wasn't stopen |
|
| Author: | dakight [ Sun Sep 02, 2007 6:27 am ] |
| Post subject: | |
It will fit and work fine. My biggest concern is that it's a Cardon reman... they don't have best reputation for quality. |
|
| Author: | SlantSixDan [ Sun Sep 02, 2007 6:31 am ] |
| Post subject: | |
Yup, if you have any possibility of getting a different brand (Bendix, Raybestos, EIS, Wagner, United), don't use that Cardone garbage. It'll only cost you money, time, effort and tears. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|