I also posted this on moparchat can I get a decode for this #.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Can I get a decode? https://slantsix.org/forum/viewtopic.php?t=25406 |
Page 1 of 1 |
| Author: | 64drtGt [ Tue Oct 16, 2007 6:14 pm ] |
| Post subject: | Can I get a decode? |
I also posted this on moparchat can I get a decode for this #.
|
|
| Author: | SlantSixDan [ Tue Oct 16, 2007 6:25 pm ] |
| Post subject: | |
7 = Dodge Dart 4 = GT model 4 = Model year 1964 2 = Built at Hamtramck, Michigan 585050 = vehicle serial number. 85,049th car built at Hamtramck this model year. |
|
| Author: | 64drtGt [ Wed Oct 17, 2007 12:23 pm ] |
| Post subject: | |
Thanks you round two DING Ok I cant read my fender tag very well but here is what i think it has on it from closest to the engine to the farthest from the engine. or top to bottom lol. This may not be all of the correct number as somone has painted the tag and I cannot read it very well but a rough decode I would be in debt for. A-Z 5 15 38 02 8 Boy BRM PNT 1210 5085 742 p4x NW8B |
|
| Author: | SlantSixDan [ Wed Oct 17, 2007 12:41 pm ] |
| Post subject: | |
The spacing amongst the different codes on the body plate is critical. The board doesn't use a monospace font unless you surround the text with the {code} ... {/code} tags (with [ square brackets ] rather than curly ones). |
|
| Author: | 64drtGt [ Wed Oct 17, 2007 12:50 pm ] |
| Post subject: | |
Ok which would you prefer me to take a picture and you to zoom in and try to see it or me to try to right it down perfectly? |
|
| Author: | SlantSixDan [ Wed Oct 17, 2007 12:58 pm ] |
| Post subject: | |
Picture would probably be easiest, but please make it a much smaller one (file size) than the VIN plate photo. |
|
| Author: | 64drtGt [ Wed Oct 17, 2007 1:04 pm ] |
| Post subject: | |
i will go take one i na few minutes but bewarned its darn near impossible to read |
|
| Author: | SlantSixDan [ Wed Oct 17, 2007 1:06 pm ] |
| Post subject: | |
If it's all rusty, you may need to take a piece of paper and "peel" a black crayon, and make a rubbing of it, then scan and post that. |
|
| Author: | 64drtGt [ Wed Oct 17, 2007 1:12 pm ] |
| Post subject: | |
Hmm for your sake I will do both rubbing and picture i can barly read this thing and I have the worst hand writing at school. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|