I have tried 7/16" bolts and 3/8"x16 and 3/8"x24 and nothing seems to be the right size for mounting my pinion snubber on my 8 3/4" rearend. Does anyone know what size bolts fits? The rearend is all ready mounted, so it is hard to see if it is even threaded.

Thanks

bwhitejr

_________________
'72 Duster (Performance 360)
'83 Ramcharger (Performance 318)
'80 TrailDuster (360)
'80 D-150 Truck (See Below)
CompCams 252S, Holley 390cfm, Offy manifold
Ported, Polished and Gasket Matched
P4286813 Springs,0.040 Overbore,
0.090 Shaved Head

Pretty sure it's 3/8-16, but it's possible it's 5/16-18 instead?

Lou

_________________
Home of Slant6-powered fun machines since 1988

It is the 3/8 - 16 unc
There must be dirt or damaged threads to deal with.
DD