Plus you will find that the Aussie motor is not a Hemi anyway.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Hemi head on a slant? https://slantsix.org/forum/viewtopic.php?t=25527 |
Page 1 of 1 |
| Author: | Moparmodeler [ Thu Oct 25, 2007 6:40 pm ] |
| Post subject: | Hemi head on a slant? |
I have an aussie connection who can hook me up with a aussie Hemi Head. Could I make one of those heads work on my 225? |
|
| Author: | Joshie225 [ Thu Oct 25, 2007 7:09 pm ] |
| Post subject: | |
No |
|
| Author: | slantzilla [ Thu Oct 25, 2007 7:21 pm ] |
| Post subject: | |
Plus you will find that the Aussie motor is not a Hemi anyway.
|
|
| Author: | SV162 [ Thu Oct 25, 2007 10:20 pm ] |
| Post subject: | |
Yeah, Hemi by name, but not by nature. Chrysler Australia used the hemi name as a marketing ploy. As you can see below, the "Hemi 6" is a very different beast to the Slant 6. 
|
|
| Author: | Rug_Trucker [ Sat Oct 27, 2007 8:06 am ] |
| Post subject: | |
buy the whole engine. There is a guy in the parts ads that sells them. |
|
| Author: | walpolla [ Sat Oct 27, 2007 1:32 pm ] |
| Post subject: | |
Quote: buy the whole engine. There is a guy in the parts ads that sells them.
and get some ear plugs while you are at it. they rattle - a lot.good power but noisy ,rattly things .(my opinion).  regards,Rod 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|