Slant Six Forum
https://slantsix.org/forum/

Three Hours on a Wednesday
https://slantsix.org/forum/viewtopic.php?t=2588
Page 1 of 1

Author:  Winklovic [ Wed Aug 22, 2001 11:42 am ]
Post subject:  Three Hours on a Wednesday

I dragged my sorry ass out of bed early this morning and by 8 am I was outside working on my Volare. First, I replaced the slowly dying starter with a (sit down Dan Stern) WILSON!!! So far, so good. If I have any trouble with it, I can go directly to the plant to kick their asses since they build them right here in Winnipeg.

Next, I replaced the fuel line from the fuel pump to carburator. The old line ran in front of the motor by the water pump, so I grabbed the other style than runs over the valve cover.

Lastly, I replaced my fixed fan with a fluid fan.

Total time: 3 hours. Now I need a back massage.


bmazur3@home.com

Author:  Alex [ Wed Aug 22, 2001 11:10 pm ]
Post subject:  Re: Three Hours on a Wednesday

Quote:
: I dragged my sorry ass out of bed early this
: morning and by 8 am I was outside working on
: my Volare. First, I replaced the slowly
: dying starter with a (sit down Dan Stern)
: WILSON!!! So far, so good. If I have any
: trouble with it, I can go directly to the
: plant to kick their asses since they build
: them right here in Winnipeg.
:
: Next, I replaced the fuel line from the fuel
: pump to carburator. The old line ran in
: front of the motor by the water pump, so I
: grabbed the other style than runs over the
: valve cover.
:
: Lastly, I replaced my fixed fan with a fluid
: fan.
:
: Total time: 3 hours. Now I need a back massage.


At least you got those things out of the way. Friday morning I'm going to get up to wax my car he old fashioned way....by hand.

TOATAL ESTIMATED TIME: 3 hours


Orionsax7@cs.com

Author:  Wesley A. Moeller [ Thu Aug 23, 2001 6:17 am ]
Post subject:  Re: Three Hours on a Wednesday

Quote:
: I dragged my sorry ass out of bed early this
: morning and by 8 am I was outside working on
: my Volare. First, I replaced the slowly
: dying starter with a (sit down Dan Stern)
: WILSON!!! So far, so good. If I have any
: trouble with it, I can go directly to the
: plant to kick their asses since they build
: them right here in Winnipeg.
:
: Next, I replaced the fuel line from the fuel
: pump to carburator. The old line ran in
: front of the motor by the water pump, so I
: grabbed the other style than runs over the
: valve cover.
:
: Lastly, I replaced my fixed fan with a fluid
: fan.
:
: Total time: 3 hours. Now I need a back massage.

I rerouted my fuel line from the pump to the carb too, I think you'll like it.

Wes '78 Volare

wes.moeller@compaq.com

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/