| Slant Six Forum https://slantsix.org/forum/ |
|
| cam failure https://slantsix.org/forum/viewtopic.php?t=26266 |
Page 1 of 1 |
| Author: | westjm [ Sun Dec 16, 2007 11:03 am ] |
| Post subject: | cam failure |
I need help picking out a new cam for my 65 dart.it has an orignal dutra intake,very mild portwork ,its about 10 to 1,it had the biggest mopar cam you could get(5.28?)it ran 15.80 in the 1/4 mile@ sac this year.any helpwould be great. |
|
| Author: | BigBlockBanjo [ Sun Dec 16, 2007 1:40 pm ] |
| Post subject: | |
Doctor Dodge is the man to talk too...... If you want to browse, I have to suggest Schneider Racing cams....they have some interesting 'big' grinds and are very reasonable on a re-grind. |
|
| Author: | terrylittlejohn [ Sun Dec 16, 2007 2:48 pm ] |
| Post subject: | cam |
the mopar 528lift cam was a nice one, i ran a best of 14.20et at 3070lbs,3.91gears and 3900 converter,with big valves and 10/1comp.with your mild porting, compression is good, mybe a cam in the 270dur/.490lift range would be better. is your car street setup? 
|
|
| Author: | Charrlie_S [ Sun Dec 16, 2007 5:42 pm ] |
| Post subject: | |
Check out the special deal, from Erson Cams, for Slant Six.Org members. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|