Do'es anyone run or have a slant rail? i like old stuff so i'm thinking I might build a front engine rail. I hate working on the dist. and oil pump in a car with a slant.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Rail https://slantsix.org/forum/viewtopic.php?t=26783 |
Page 1 of 2 |
| Author: | elam [ Mon Jan 21, 2008 5:34 pm ] |
| Post subject: | Rail |
Do'es anyone run or have a slant rail? i like old stuff so i'm thinking I might build a front engine rail. I hate working on the dist. and oil pump in a car with a slant.
|
|
| Author: | imnoisydart [ Mon Jan 21, 2008 8:09 pm ] |
| Post subject: | |
Hot Rod magazine this month- Marlan Davis has a SL 6 rail from the 60's picture posted- just what you want. You could also cut the fenderwell away from the passenger side of a doorslammer car. |
|
| Author: | Old6rodder [ Tue Jan 22, 2008 9:18 am ] |
| Post subject: | |
Howdy Elam, Here's something that might tickle your fancy and doesn't cost an arm & a leg. They're a sub-section of Jalopy Journal/H.A.M.B. and are getting to be rather popular in your neck of the woods. HA/GR class Rules Forum We're still batting our heads against N(o) H(ot) R(ods) A(llowed) out here in SoKal but hope yet lives. We're also taking our car (Barn Job #18 in the photos link in my sig) on a road tour in August to get in some strip time here and there this year. |
|
| Author: | elam [ Wed Jan 23, 2008 4:07 am ] |
| Post subject: | |
WOW  I do'nt know where to start. I found the rail in my hotrod I had not looked at it yet, Thanks. Old6RODDER wow your right that stuff is right up my alley. I love your work I have built simular cars to yours I actually found I think your car a couple years ago and used it for some ideas on my 30 chevy roadster pickup. THANKS. I think I have the bug again. I get so sick of the high dollar stuff this is great.
|
|
| Author: | slantzilla [ Wed Jan 23, 2008 5:41 am ] |
| Post subject: | |
Mark Dingbaum in Iowa has a FE dragster with a Slant/727 in it. I have not heard from him for a while. Last time I talked to him the car had run low 12's with a mild Slant. Sounds like a really cool project Mike. 
|
|
| Author: | elam [ Wed Jan 23, 2008 1:30 pm ] |
| Post subject: | |
Being cheap I really like the idea of using a full wide rear end and I have a late 30's frame out behind the shed now just waiting but the rules say the engine needs to be 62 or older. I probable would only run with you guys any way so that would'nt matter. I only had dialup untill a couple weeks ago so I was off here a long time but I need to find out how to post pictures now. I don't know where to host my pic. |
|
| Author: | Joshie225 [ Wed Jan 23, 2008 2:59 pm ] |
| Post subject: | |
The HAMB guys don't mind if you use a later slant block since it's not a performance advantage. My favorite photo hosting site is Photobucket .com. All the other photo hosting sites I've seen people use were slower, sacrificed quality or lacked organization. |
|
| Author: | Old6rodder [ Wed Jan 23, 2008 7:23 pm ] |
| Post subject: | |
Yep, The later slant blocks aren't a problem as they're the same starting point bore & stroke wise. Stick with a drool tube head and nobody'll complain (probably wouldn't anyway). Same thing with the trans and rear. Let's face it, they're just gears. The spirit of the thing in the late forties and early fifties is the point. Low bucks drag racers then were working with simple carbs, mechanical ignitions, manual gearboxes, whatever happened to be at hand. Typically this was average passenger car equipment. I use Flickr and they have a low volume free service in addition to their paid ones. They're a bit disorganised but not unlearnable. There're probably better ones available, but it's OK for what I do. How'd the five window project go? Certainly would like to see some picks of that as well. |
|
| Author: | Shaker223 [ Wed Jan 23, 2008 7:35 pm ] |
| Post subject: | |
Wasn't the crooked six up for sale? Wasn't that a rail...I can't recall. |
|
| Author: | Old6rodder [ Wed Jan 23, 2008 9:38 pm ] |
| Post subject: | |
Yeah, it has a new home. |
|
| Author: | elam [ Fri Jan 25, 2008 6:17 pm ] |
| Post subject: | |
I'll try to figure out the photo thing. I have several pictures to share. |
|
| Author: | slantzilla [ Fri Jan 25, 2008 9:36 pm ] |
| Post subject: | |
Mike, e-mail them to me and I can host them for you. slantzilla@excite.com If you're interested, I have a Clifford Hyper-Pak intake I would let you use for your project.
|
|
| Author: | RE Jones [ Tue Feb 05, 2008 4:51 pm ] |
| Post subject: | rail |
elam, I'm down here in Florida and have a slant six rail that runs the HAMB class. I am at work and have no way to post pictures, if I can get your e-mail addy, I could send some your way. Robert |
|
| Author: | HAGR GAS RAIL [ Sun Mar 02, 2008 10:52 am ] |
| Post subject: | |
I just finished my chassis for my HA/GR rail yesterday.Im going to get it home today and ill try and get some pics |
|
| Author: | Dolmetsch [ Mon Sep 01, 2008 4:34 pm ] |
| Post subject: | Sr D |
I have one. Ran 8.43@ 81.76 (1/8 mile)on it first ever soft shakedown pass. Aug 16 2008 Shannonvile Motorsports Park p Fun with a capital F |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|