I don't know what kind of paint you used but try running a soft clean rag over fuse block with laquer thinner.Don't scrub it,just go over it quick and light.Make sure the battery is disconnected,don't want no flames an such on the new paint
| Slant Six Forum https://slantsix.org/forum/ |
|
| 63 Dart Fuse Block https://slantsix.org/forum/viewtopic.php?t=27140 |
Page 1 of 1 |
| Author: | Davids63Dart [ Mon Feb 11, 2008 8:03 pm ] |
| Post subject: | 63 Dart Fuse Block |
When someone (me) painted the dash in my Dart, they got overspray on the fuse block, so I can't really make out what the words are. I can sort of see some, but not all. Is there anyone who knows or can find what the words are supposed to be? Also, Where is the fuse block supposed to be attached? Mine is just kind of hanging. Thanks. |
|
| Author: | emsvitil [ Mon Feb 11, 2008 8:18 pm ] |
| Post subject: | |
On my 64, the fuse block is near the steering column and attached to the lower painted steel panel with a big screw that goes up into the fuse block (the screw taps into the fuse block). Look for a hole in the steel panel and trial fit some screws into the fuse block until you find one that works |
|
| Author: | Davids63Dart [ Mon Feb 11, 2008 10:49 pm ] |
| Post subject: | |
Thanks, I saw a threded hole on the fuse box. Any idea on what the words are? |
|
| Author: | emsvitil [ Mon Feb 11, 2008 10:57 pm ] |
| Post subject: | |
I just went with the position of the fuse and the wiring diagram....... |
|
| Author: | 6shotvanner [ Tue Feb 12, 2008 7:24 am ] |
| Post subject: | |
I don't know what kind of paint you used but try running a soft clean rag over fuse block with laquer thinner.Don't scrub it,just go over it quick and light.Make sure the battery is disconnected,don't want no flames an such on the new paint
|
|
| Author: | Chuck [ Fri Feb 22, 2008 3:48 pm ] |
| Post subject: | |
 From left to right: Instrument Tail/Stop/Dome Cigar Accessories Heat/AC Radio |
|
| Author: | Davids63Dart [ Sat Feb 23, 2008 12:33 am ] |
| Post subject: | |
Thanks Chuck, that's what I needed. |
|
| Author: | Chuck [ Sat Feb 23, 2008 1:39 pm ] |
| Post subject: | |
Did you find the mounting tab, or do I need to round up a picture for you? |
|
| Author: | Davids63Dart [ Sat Feb 23, 2008 6:59 pm ] |
| Post subject: | |
Is it on the bottom of the dash? There's some kind of tab there. It looks like it would bolt right up. |
|
| Author: | Chuck [ Sat Feb 23, 2008 11:23 pm ] |
| Post subject: | |
That's it. I can't remember what the screw looks like, but it has to be fairly long. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|