| Slant Six Forum https://slantsix.org/forum/ |
|
| Moog Suspension Parts https://slantsix.org/forum/viewtopic.php?t=27586 |
Page 1 of 1 |
| Author: | xjarhead [ Sun Mar 02, 2008 9:18 am ] |
| Post subject: | Moog Suspension Parts |
Are these good steering parts? I want to replace some parts and i want something that is going to last. Is there another company to go with? Thanks Dave |
|
| Author: | Shaker223 [ Sun Mar 02, 2008 9:55 am ] |
| Post subject: | |
I returned my Moog and went with Just Suspension. They claimed all the parts were made in the USA. I'm happy with mine so far. PS=this should be in the suspension section. |
|
| Author: | Slantenstein [ Sun Mar 02, 2008 9:58 am ] |
| Post subject: | |
I found an article (www.cbodydrydock.com/content.php?article.20) about Moog ball joints and Just Suspension Ball Joints They show a side by side comparison of the two makers. Hope this helps. Bill |
|
| Author: | SlantSixDan [ Sun Mar 02, 2008 10:30 am ] |
| Post subject: | |
That's certainly an interesting comparison. I didn't know JS make their own parts. Moog are now Federal-Mogul, which is bad news. Follow the links off this post. |
|
| Author: | 65Dodge100 [ Sun Mar 02, 2008 11:04 am ] |
| Post subject: | SSDan |
| Author: | SlantSixDan [ Sun Mar 02, 2008 12:12 pm ] |
| Post subject: | |
Instructions for embedding links are here. To link to a specific post, use the board's Search function to find the exact post you want (if you're looking at the post you want, find some unique keywords in it and note its author, then plug those into the Search function). Once you're given the search results page, find your target post again and right-click/copy link the post title (not the thread subject title). That's the URL you want to embed. It's best to delete the search keywords out of the URL you paste into the link. |
|
| Author: | Shaker223 [ Sun Mar 02, 2008 1:02 pm ] |
| Post subject: | |
I saw that c body article and called JS. They said all of their stuff was made in the USA. Dana was one of the companies that made some of the components and another that I can't recall. It looks like they re-engineered some of the stuff or at least engineered it back to the way it was. |
|
| Author: | xjarhead [ Mon Mar 03, 2008 10:34 am ] |
| Post subject: | |
Thanks allot for the help everyone. Hope JS has truck parts. Dave |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|