Slant Six Forum
https://slantsix.org/forum/

Aluminum Block Question
https://slantsix.org/forum/viewtopic.php?t=28542
Page 1 of 1

Author:  Michael [ Wed Apr 23, 2008 4:50 pm ]
Post subject:  Aluminum Block Question

I am beginning to assemble a beautiful aluminum six for my '63 convertible and everything is going well but I see some pitting in two of the cam jounals. Is there anything that I can/should attempt to remedy this? The pitting may have been there from the factory as it looks suspiciously like a casting issue. Any help is much appreciated!

Author:  Doc [ Wed Apr 23, 2008 5:15 pm ]
Post subject: 

Do not worry about the pits, many of the Aluminum blocks have those and they still run fine.
DD

Author:  Michael [ Wed Apr 23, 2008 5:49 pm ]
Post subject:  Whew!

Thanks for the good news Doc! I've had that block waiting for five years and kinda' panicked when I saw the pitting.
http://s253.photobucket.com/albums/hh71 ... G_0959.jpg

Author:  LUCKY13 [ Wed Apr 23, 2008 6:38 pm ]
Post subject: 

Extra pockets to hold oil :D


Jess

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/