: Also, anyone want to comment on why the
: cylinders "walk" with 225-300 hp?

: There is no top "deck" on an Alm. SL6
: so there is not a lot of support to keep 6
: inches++ of free standing cylinder barrel
: from moving around.
: DD

: I was talking to a guy that mentioned welding
: braces to the wall, to help out the
: situation, any comments??

: It's propably possible; I Have seen it done in
: to a Russian four cylinder engine. Actually
: it was done by removing the liner, welding
: the deck solid, boring holes for new liners
: (maybe you could go bigger too?), installing
: liners and boring holes around the liners
: for water circulation. These mods made the
: weak block good for about 600 hp (out of a
: 1.5 litre) and was good for low 10 second
: ET's at over 140 mph in a 2500 lbs street
: Moskvitsh!

: I was talking to a guy that mentioned welding
: braces to the wall, to help out the
: situation, any comments??