Mike post in the "Parts Wanted" section and check through the "Parts for Sale" section.If you cann't find any and you're feeling rich try Stockton Wheel,they can make just about anything,if you got the money
| Slant Six Forum https://slantsix.org/forum/ |
|
| 14" rims? https://slantsix.org/forum/viewtopic.php?t=29908 |
Page 1 of 1 |
| Author: | Mike_64_Valiant [ Mon Jul 07, 2008 2:38 pm ] |
| Post subject: | 14" rims? |
Where is the best place or way to accquire a set of 6 14" small bolt pattern steel rims(cop style?). I will sand blast them and powdercoat them so condition is not a big deal just need to be straight and not bent. |
|
| Author: | DusterTeen08 [ Mon Jul 07, 2008 3:12 pm ] |
| Post subject: | |
you could check the junkyard? |
|
| Author: | 6shotvanner [ Mon Jul 07, 2008 3:36 pm ] |
| Post subject: | |
Mike post in the "Parts Wanted" section and check through the "Parts for Sale" section.If you cann't find any and you're feeling rich try Stockton Wheel,they can make just about anything,if you got the money
|
|
| Author: | MiDi [ Mon Jul 07, 2008 4:19 pm ] |
| Post subject: | |
i see 14" mopar steely's on craigslist pretty often going for $20 to $25 ea. but check the parts for sale section, its best to buy used and to buy from the slant six community.also wildcar wrecking will have them. www.wildcatmopars.com - located about 35mins east of portland oregon. |
|
| Author: | vynn3 [ Tue Jul 08, 2008 6:00 am ] |
| Post subject: | |
Unless you mean the REAL police wheels, like these:  They didn't make these in the small bolt pattern. But like they said, I'm sure Stockton Wheel would be willing to make a custom set, for the right price... |
|
| Author: | tophat [ Tue Jul 08, 2008 4:55 pm ] |
| Post subject: | |
You may also try www.forabodiesonly.com or www.bigblockdart.com as they are other boards devoted to a bodies. TopHat |
|
| Author: | emsvitil [ Tue Jul 08, 2008 11:14 pm ] |
| Post subject: | |
SBP steelies with dog-dish hubcaps is close enough..... see my sig pic |
|
| Author: | Mike_64_Valiant [ Wed Jul 09, 2008 2:15 pm ] |
| Post subject: | |
Thanks very much guys. I guess I just want the stock style and not the police style. The kind in Emsvitil's picture. The plan is to Powder coat the rims the same as the car and the put my dog dish Valiant caps from my 13's to a set of 14's I want to install a set of 4 Falken ZE-912 195/60R14 for regular driving and a pair of super sticky Falken Azenis RT-615 195/60R14 for the track. There's not much for junk yards with A Bodies in the Elizabeth City/Outer Banks Area of NC. or Craigs list for that matter so I need to look in the Virginia beach area and buy the time I can get to VA most of the time things are gone. Dose anyone know of any good Mopar yards in VA or NC if I have to make a road trip? |
|
| Author: | emsvitil [ Wed Jul 09, 2008 5:32 pm ] |
| Post subject: | |
195/60 14 sounds a bit small... I'm using 195/70 14s and 205/70 14s are also common. Make sure you get the 14 x 5.5 not the 14 x 4.5s... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|