I have no idea what head grooving is.
Anybody else?
| Slant Six Forum https://slantsix.org/forum/ |
|
| head grooving https://slantsix.org/forum/viewtopic.php?t=30183 |
Page 1 of 1 |
| Author: | theslantingsix [ Fri Jul 25, 2008 4:58 am ] |
| Post subject: | head grooving |
i was reading in the fam show (a redneck magizine about peoples inventions to make farm work and other stuph easier on the farm) so it was talking about head grooving it was talking about good horsepower gains and better econimy. has eny one tried this on a slant or just a mopar v8? |
|
| Author: | Wesola78 [ Fri Jul 25, 2008 8:33 am ] |
| Post subject: | |
I have no idea what head grooving is. Anybody else?
|
|
| Author: | mopar_nocar [ Fri Jul 25, 2008 8:50 am ] |
| Post subject: | |
Aw geez, not again. http://www.slantsix.org/forum/viewtopic ... ad+grooves sb |
|
| Author: | Wesola78 [ Fri Jul 25, 2008 9:00 am ] |
| Post subject: | |
Well, that clears that up... Thanks! |
|
| Author: | theslantingsix [ Fri Jul 25, 2008 12:03 pm ] |
| Post subject: | |
so it works right?? |
|
| Author: | Joshie225 [ Fri Jul 25, 2008 12:11 pm ] |
| Post subject: | |
Not on an open combustion chamber and probably not on other styles of chambers. |
|
| Author: | theslantingsix [ Fri Jul 25, 2008 2:07 pm ] |
| Post subject: | |
but will it work on a slant? |
|
| Author: | Joshie225 [ Fri Jul 25, 2008 2:31 pm ] |
| Post subject: | |
No, slants have open combustion chambers. |
|
| Author: | AndyZ [ Fri Jul 25, 2008 3:58 pm ] |
| Post subject: | |
This will only work if you put a magnet on your fuel line and a fan looking thing on your throttle body... 
|
|
| Author: | MichaelS [ Fri Jul 25, 2008 4:54 pm ] |
| Post subject: | |
now if that fan looking thingy has a belt to drive it you might have something. |
|
| Author: | AndyZ [ Mon Jul 28, 2008 9:07 am ] |
| Post subject: | |
Groooovey baby, Yeah! |
|
| Author: | Rug_Trucker [ Thu Jul 31, 2008 9:37 am ] |
| Post subject: | |
I was grooving a SB 302 head (Mopar closed chamber 318) and made a mess with my die grinder. I need to smooth it and live with it. One cylinder only. Or have it welded. I have a llot of hours in the head with me porting it. |
|
| Author: | Rug_Trucker [ Thu Jul 31, 2008 9:38 am ] |
| Post subject: | |
This mod works only if yer runnin moonshine in the tank! 
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|