| Slant Six Forum https://slantsix.org/forum/ |
|
| Oil gallery plugs https://slantsix.org/forum/viewtopic.php?t=30268 |
Page 1 of 1 |
| Author: | 6shotvanner [ Tue Jul 29, 2008 5:15 pm ] |
| Post subject: | Oil gallery plugs |
Whats a tried and proven "goop" sealer to use on these plugs? Thanks |
|
| Author: | tophat [ Tue Jul 29, 2008 6:15 pm ] |
| Post subject: | |
I like permatex "Indian Head" gasket goop. http://tinyurl.com/5ppote I'm sure others have other things they like to use. TopHat |
|
| Author: | Shaker223 [ Tue Jul 29, 2008 6:33 pm ] |
| Post subject: | |
TFE Paste with teflon @ Home Depot. I use it on fuel,oil,water, air fittings. http://www.homedepot.com/webapp/wcs/sto ... =100147323 |
|
| Author: | robertob [ Wed Jul 30, 2008 11:18 am ] |
| Post subject: | |
Hylomar blue in the tube. Hard to find, but if it's good enough for Rolls-Royce it's good enough for me:) I also like the non-hardening compounds used on motorcycles from Threebond - Hondabond, Yamabond, etc. |
|
| Author: | emsvitil [ Wed Jul 30, 2008 1:53 pm ] |
| Post subject: | |
Quote: Hylomar blue in the tube. Hard to find, but if it's good enough for Rolls-Royce it's good enough for me:)
Yea, permatex doesn't carry hylomar anymore.  But you can get it from Harley Davidson. Part No. 99653-85 about $10 for 3.5oz tube. |
|
| Author: | robertob [ Wed Jul 30, 2008 2:28 pm ] |
| Post subject: | |
i didn't know that. I got mine from Valco direct because I couldn't find any around here. It's the new "medium" formulation which is stickier than the old-school permatex "solvent-free" stuff. A friend of mine swears by the spray-on stuff for head gaskets but I'd rather not mess with anything in that application! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|