Whats a tried and proven "goop" sealer to use on these plugs? Thanks

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

I like permatex "Indian Head" gasket goop.
http://tinyurl.com/5ppote

I'm sure others have other things they like to use.


TopHat

TFE Paste with teflon @ Home Depot. I use it on fuel,oil,water, air fittings.

http://www.homedepot.com/webapp/wcs/sto ... =100147323

Hylomar blue in the tube. Hard to find, but if it's good enough for Rolls-Royce it's good enough for me:)

I also like the non-hardening compounds used on motorcycles from Threebond - Hondabond, Yamabond, etc.

Yea, permatex doesn't carry hylomar anymore.


But you can get it from Harley Davidson.

Part No. 99653-85 about $10 for 3.5oz tube.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

i didn't know that. I got mine from Valco direct because I couldn't find any around here. It's the new "medium" formulation which is stickier than the old-school permatex "solvent-free" stuff. A friend of mine swears by the spray-on stuff for head gaskets but I'd rather not mess with anything in that application!