Slant Six Forum https://slantsix.org/forum/ |
|
2bbl swap help please https://slantsix.org/forum/viewtopic.php?t=30448 |
Page 1 of 2 |
Author: | 1970dart225six [ Fri Aug 08, 2008 4:28 pm ] |
Post subject: | 2bbl swap help please |
i have a 1970 225 slant six dart, it was a single carb, and i have begun to switch it to two barrel i have changed the intake and exhaust manifolds and have mounted the car but i cant figure out to mount all the conection for the throttle etc and i am installing a manual choke if u know how to do these things can tell me how or send me a pic of how it looks done! |
Author: | Aggressive Ted [ Fri Aug 08, 2008 5:31 pm ] |
Post subject: | |
Do you need more picks than what is posted on the front page???? Mopar Slant Six, "Super Six" Two Barrel System By Reed Speir ("Reed") Edit & webpage layout by Doug Dutra (Doctor Dodge) Those aren't that bad. What specifically are you having problems with? Do you have the FSM for a 1976 or 77 Super Six? |
Author: | MiDi [ Fri Aug 08, 2008 7:39 pm ] |
Post subject: | |
i agree that the super six article is extermely usefull. i printed it out and have read it prolly 100 times. here is what my super six looks like custom throttle cable bracket made my ceej and fopar. i use a lokar cable insted of a kick down. the throttle return spring bracket is off a v-8 kick down that i modifed to work. slantsixdan has posted an awesome electric choke kit for the 2bbl in the slanted network part of this forum. |
Author: | ESP47 [ Fri Aug 08, 2008 10:07 pm ] |
Post subject: | |
These aren't mine but they're just some of the photos I used for reference when I put my super six setup on. |
Author: | 1970dart225six [ Fri Aug 08, 2008 10:43 pm ] |
Post subject: | |
hey thanx for the pics guys, on my car there seems to be a rod that goes to the tranny just under the fire wall(drivers side) it was attached before but after i attached the new carb do i need that-wat ever it is--anymore? i think its just a kickdown linkage but i dont seem to need it, but im not really sure ESP47 posts have it some how rigged up? but wat is it? |
Author: | dakight [ Sat Aug 09, 2008 7:40 am ] |
Post subject: | |
If I understand you correctly, that is the kickdown linkage for the automatic tranny. If you have an automatic then you need it; if you have a manual then you don't |
Author: | Reed [ Sat Aug 09, 2008 8:10 am ] |
Post subject: | |
Hello and welcome. First, read this article. It will answer most of your questions about converting from a one barrel to a two barrel. Here is how the linkages attach to the carb: You must also adjust the kickdown linkage once it is installed: Good luck and feel free to ask any more wuestions! |
Author: | ESP47 [ Sat Aug 09, 2008 10:52 am ] |
Post subject: | |
If i'm reading you correctly, you have the old 1 BBL kickdown linkage. You're gonna need a 2 BBL kickdown with all the brackets to make your super six shift right. Your old linkage won't work and I wouldn't recommend driving it much without a new linkage. |
Author: | 1970dart225six [ Sat Aug 09, 2008 1:06 pm ] |
Post subject: | |
yea i have the old 1 barrel kickdown, how much would it be to get all the brackets etc for the two barrel and the kickdown? |
Author: | SlantSixDan [ Sat Aug 09, 2008 1:12 pm ] |
Post subject: | |
The 2bbl kickdown linkage setups are getting tough to find and costly. See this thread for kickdown options. |
Author: | ESP47 [ Sat Aug 09, 2008 3:31 pm ] |
Post subject: | |
http://tinyurl.com/5jmxdb Thats the only one I could find on ebay. It's very pricey. I think people are fooled because he did a good job cleaning it up. They don't usually go for that high but if you need one now then your options are slimmer. |
Author: | dusterguy225 [ Sat Aug 09, 2008 3:51 pm ] |
Post subject: | |
Wow, ESP47, your right, that is very pricey. I bought my super six set up, that I plan to rebuild, from a pull a part in nashville for $40! And its complete! |
Author: | 1970dart225six [ Sat Aug 09, 2008 3:53 pm ] |
Post subject: | |
ive been making my own addapter for the single carbs kickdown to the 2 barrel and its actually working very well i will post pics when im done, thanx for the help! by the way im 17 and this is my first car |
Author: | MiDi [ Sat Aug 09, 2008 4:14 pm ] |
Post subject: | |
http://www.lokar.com/interior_pages/tc_kd.htm |
Author: | Aggressive Ted [ Sat Aug 09, 2008 8:05 pm ] |
Post subject: | |
Midi, Which one did you use? Do you have a part number? |
Page 1 of 2 | All times are UTC-07:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |