Slant Six Forum :: DANA 60

: How do you identify a DANA 60 rearend? Im
: pretty sure its a 14 bolt rear cover, but
: are there any numbers to differentiate
: between a 60,70,and a 80?

:
: Hi,
:
: I'm pretty sure the Dana 60 has a 10 bolt
: cover...
:
: There is a big "60" cast into the
: lower right (viewed from cover side) web
: (from near cover to near right tube), that
: will tell you if its a 44 or 60, not sure if
: the 70 and 80 have the same casting mark.
:
: good luck,
: mark

: From what I remember, the 70 has it cast in
: there somewhere too. It has been a while
: since I climbed underneath my dad's truck,
: but I think I remember seeing it. I may get
: a chance to check this weekend depending on
: what he drives. Just curious though- what
: will this be going behind?

:
: this will be going behind a 440 an a 4 gear. My
: friend lokes my turbo idea so hes going to
: jerk the slant six out of his 65 Belvedere
: and drop in 440 and stick a couple turbos on
: it. I figure with the torque it will make a
: Dana might be in order.

Author:	max roth [ Tue Jan 08, 2002 2:40 pm ]
Post subject:	DANA 60
How do you identify a DANA 60 rearend? Im pretty sure its a 14 bolt rear cover, but are there any numbers to differentiate between a 60,70,and a 80? madmax6995@hotmail.com

Author:	Tim Keith [ Tue Jan 08, 2002 5:58 pm ]
Post subject:	Re: DANA 60
try this link Quote: : How do you identify a DANA 60 rearend? Im : pretty sure its a 14 bolt rear cover, but : are there any numbers to differentiate : between a 60,70,and a 80? axles spotters guid tkeith@mindspring.com

Author:	mark dingbaum [ Wed Jan 09, 2002 12:22 pm ]
Post subject:	Re: DANA 60
Hi, I'm pretty sure the Dana 60 has a 10 bolt cover... There is a big "60" cast into the lower right (viewed from cover side) web (from near cover to near right tube), that will tell you if its a 44 or 60, not sure if the 70 and 80 have the same casting mark. good luck, mark mldingba@collins.rockwell.com

Author:	kairosman [ Thu Jan 10, 2002 9:44 am ]
Post subject:	Re: DANA 60
From what I remember, the 70 has it cast in there somewhere too. It has been a while since I climbed underneath my dad's truck, but I think I remember seeing it. I may get a chance to check this weekend depending on what he drives. Just curious though- what will this be going behind? Quote: : : Hi, : : I'm pretty sure the Dana 60 has a 10 bolt : cover... : : There is a big "60" cast into the : lower right (viewed from cover side) web : (from near cover to near right tube), that : will tell you if its a 44 or 60, not sure if : the 70 and 80 have the same casting mark. : : good luck, : mark glovert@southwestern.edu

Author:	max roth [ Mon Jan 14, 2002 12:40 pm ]
Post subject:	Re: DANA 60
Quote: : From what I remember, the 70 has it cast in : there somewhere too. It has been a while : since I climbed underneath my dad's truck, : but I think I remember seeing it. I may get : a chance to check this weekend depending on : what he drives. Just curious though- what : will this be going behind? this will be going behind a 440 an a 4 gear. My friend lokes my turbo idea so hes going to jerk the slant six out of his 65 Belvedere and drop in 440 and stick a couple turbos on it. I figure with the torque it will make a Dana might be in order. madmax6995@hotmail.com

Slant Six Forum https://slantsix.org/forum/

DANA 60 https://slantsix.org/forum/viewtopic.php?t=3080	Page 1 of 1

Author:	kairosman [ Mon Jan 14, 2002 7:47 pm ]
Post subject:	Re: DANA 60
Yup, dana might be a good call there. Sounds neat. Tell us where we can see some of his pics if he posts them-even if it isn't a slant. Quote: : : this will be going behind a 440 an a 4 gear. My : friend lokes my turbo idea so hes going to : jerk the slant six out of his 65 Belvedere : and drop in 440 and stick a couple turbos on : it. I figure with the torque it will make a : Dana might be in order. glovert@southwestern.edu

Page 1 of 1	All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/