| Slant Six Forum https://slantsix.org/forum/ |
|
| MS II Controlling Dwell - What Can I gap the Plugs at Now? https://slantsix.org/forum/viewtopic.php?t=31690 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Tue Oct 14, 2008 6:53 pm ] |
| Post subject: | MS II Controlling Dwell - What Can I gap the Plugs at Now? |
Well I have My MS-II Running pretty smooth and everything now, So I was wondering if I can raise the dwell settings a bit if I open the gap on the Plugs. My max dwell now is 3.9ms and I tried to gap the plugs @ .050" and the car would not start. I backed it down to .040" and the car started again and ran fine. I guess I also do not want to raise the dwell too much as to not burn the coil out.(unnecessary overheating) I have a Single MSD Blaster 2 Coil and I am still using a Distributor for triggering / ign Distribution. Thanks, Greg |
|
| Author: | Dart270 [ Wed Oct 15, 2008 5:32 am ] |
| Post subject: | |
Plug gap doesn't make much difference as long as it's in a decent range. I'd just leave them at 0.040". Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|