I saw this ad on CL and I'm going to ask him to send me some pictures of the k-member and attached disc brake parts. Any ball park as to what I should offer him for it. I'll pick up the wheels as well.

Now all I have to do is convince my wife its a good idea.

_________________
The North American Wild Chihuahua lives in a mutualistic relationship with the North American Wild Cow, providing an early alert system and carrion clean up.

$250.00

_________________
1969-1/2 Dodge Super Bee A12 (440 Six Pack, 4-spd, Dana 60)
1974 Plymouth Duster 360 (4-spd, 8.75")
1973 Plymouth Duster (225, auto, 8.25")
2001 Dodge Ram 1500 QC 2wd (5.9L, auto, Dana 60)

Just to give you an idea, I just paid $550 for the whole disk set up (upper/lower control arms w/ sway bar tabs, spindles, rotors, calipers, all new high quality bearings and bushings for the whole front end) a 7 1/4 rear with big bolt pattern, factory rear sway bar and all new mounting hardware, and a set of Magnum 500s. I might be forgetting something... Oh, and I hauled it all 4 hours home in my Dart!

_________________

If you can get the setup for under $200 that would be ok. Just remember that you most likely will have to rebuild the calipers, maybe bushings, ball joints, hoses....ect. The conversion can be completly done for under $350.

_________________

Just tell your wife with disc brakes you will actually be able to stop your car Safety first

_________________