Slant Six Forum
https://slantsix.org/forum/

fiberglass parts
https://slantsix.org/forum/viewtopic.php?t=3206		 Page 1 of 1
Author:  mike [ Tue Feb 05, 2002 10:18 pm ]
Post subject:  fiberglass parts
Does any one know where I can get fiberglass parts for a 65 valiant. I need parts like a hood and fenders.
Author:  MAX [ Wed Feb 06, 2002 2:52 pm ]
Post subject:  Re: fiberglass parts
Quote:
: Does any one know where I can get fiberglass
: parts for a 65 valiant. I need parts like a
: hood and fenders.


You might try <A HREF="http://www.aarqualityfiberglass.com">www.aarqualityfiberglass.com</A>
They dont have anything listed for your car, but it might be in the works. They might hhok you up with someone who does also.

madmax6995@hotmail.com
Author:  Dave M [ Thu Feb 07, 2002 8:54 pm ]
Post subject:  Re: fiberglass parts
Quote:
: Does any one know where I can get fiberglass
: parts for a 65 valiant. I need parts like a
: hood and fenders.


I bought some for my 1965 Plymouth wagon from a place down in Florida. I am ready to hit the sack tonight but tomorrow I will post the part numbers and the prices that I payed for them several years ago.

damuel@kalama.com
Author:  Dave M [ Sat Feb 09, 2002 7:26 pm ]
Post subject:  Re: fiberglass parts
Quote:
: Does any one know where I can get fiberglass
: parts for a 65 valiant. I need parts like a
: hood and fenders.


I finally found the catalog I was looking for. When I bought my fiberglass hood and front fenders is was from U.S. Body Source. Their address is :
U.S. Body Source
Star Rt 1 box 800
Hampton, Flordia 32044
phone number 904 468 2203
fax number 904 468 2164
They have the hoods in light weight for racing and heavy duty for street cars. I bought race weight. Hood part number CUH-01 and the front fenders were CUF-1 Back when I purchased these parts the hood was $179 and the fenders were $189 each. I live in Washington so their was some serious freight charges also. I bought these in 1993 hope they are still in business.

damuel@kalama.com
Author:  GTS225 [ Sun Feb 10, 2002 3:16 am ]
Post subject:  Re: fiberglass parts
Quote:
: When I bought my fiberglass hood and front
: fenders is was from U.S. Body Source.

**************************************************
U.S. Body Source is still in business, and they do have a website.
:
: They have the hoods in light weight for racing
: and heavy duty for street cars. I bought
: race weight.
**************************************************
Dave......what did you think of the quality and service? I'm thinking of putting a '68 dart on a severe diet, and am doing some window shopping and research at this time.

Roger

GTS225@aol.com
Author:  Dave Wordinger [ Sun Feb 10, 2002 2:14 pm ]
Post subject:  Re: fiberglass parts
Quote:
: When I bought my fiberglass hood and front
: fenders is was from U.S. Body Source. Their
: address is : U.S. Body Source
: Star Rt 1 box 800
: Hampton, Flordia 32044
: phone number 904 468 2203
: fax number 904 468 2164


<A HREF="http://www.usbodysource.com">www.usbodysource.com</A>

dwordinger@earrthlink.net
Author:  Dave M [ Sun Feb 10, 2002 8:23 pm ]
Post subject:  Re: fiberglass parts
Quote:
:
: **************************************************
: U.S. Body Source is still in business, and they
: do have a website.
:
: **************************************************
: Dave......what did you think of the quality and
: service? I'm thinking of putting a '68 dart
: on a severe diet, and am doing some window
: shopping and research at this time.
:
: Roger


I thought that the hood fit was pretty good. The fenders took more work to get all the gaps and edges the same. When I got done it looked just like stock front end.

damuel@kalama.com
Author:  Will [ Sun Feb 17, 2002 4:46 am ]
Post subject:  Re: fiberglass parts
Quote:
: Does any one know where I can get fiberglass
: parts for a 65 valiant. I need parts like a
: hood and fenders.

Look under Barrcuda parts in the catalogs.

slantsix@netzero.net
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/