Slant Six Forum
https://slantsix.org/forum/

TCI shift kit
https://slantsix.org/forum/viewtopic.php?t=32245		 Page 1 of 1
Author:  NewSlanter [ Thu Nov 13, 2008 7:27 pm ]
Post subject:  TCI shift kit
Anyone here ever used one? How did it work out for you? Trans-go kits don't seem to be distributed this end of the country, but I can nab a TCI kit from a local speed shop. Any thoughts?

Thanks,

Nat
Author:  SlantSixDan [ Thu Nov 13, 2008 8:04 pm ]
Post subject: 
If you have access to the internet somewhere near you, you ought to be able to find the Trans-Go kit. That's the one I'd hold out for.
Author:  Joshie225 [ Thu Nov 13, 2008 8:27 pm ]
Post subject: 
TransStar carries TransGo shift kits. Your local distributor is:

King-O-Matic

Vancouver, British Columbia, Canada
1486 Cliveden Ave.
Delta, BC V6M 6L9

Phone: 604-540-1818
Fax: 604-540-8881
Toll Free: 800-667-6388

E-Mail: info@transtar1.com

Contact: Shawn Hailes
Author:  NewSlanter [ Thu Nov 13, 2008 10:33 pm ]
Post subject: 
Joshie,

Thanks a million. I looked on the TransGo website and they didn't list any Canadian distributors. I admit that was as far as I dug :oops: I'll call them tomorrow.

Thanks again,

Nat
Author:  Joshie225 [ Thu Nov 13, 2008 11:17 pm ]
Post subject: 
It took a little digging for me to find that. I bought my rebuild stuff from TransStar in Portland, but I couldn't remember the TransStar name off the top of my head and the receipts are at home while I'm here working swing shift. One of these days I'll actually get to see how my 1st automatic overhaul works. I was very careful and think it will work fine. I just hope it shifts itself at the proper RPM so I don't have to manually shift it.
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/