| Slant Six Forum https://slantsix.org/forum/ |
|
| Turbo Plumbing https://slantsix.org/forum/viewtopic.php?t=32328 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Wed Nov 19, 2008 4:00 pm ] |
| Post subject: | Turbo Plumbing |
So if You had a choice on Fabbing up A turbo System from scratch, Using an air-air intercooler which kind of hose works better?? On the pressure side of course.. I mean between the output of the compressor through the intercooler and leading up to the throttlebody. Silicone or Nitrile? I see both listed on turbonetics' Website.. Thanks, Greg |
|
| Author: | Matt Cramer [ Thu Nov 20, 2008 7:02 am ] |
| Post subject: | |
I'm using aluminum, with silicone couplings. |
|
| Author: | Rust collector [ Thu Nov 20, 2008 12:50 pm ] |
| Post subject: | |
Nitrile is for low pressure, as before the turbo, or really low boost setups, silicone is for high pressure |
|
| Author: | Greg Ondayko [ Thu Nov 20, 2008 5:19 pm ] |
| Post subject: | |
Thanks guys I guess that answers that. Greg |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|