| Slant Six Forum https://slantsix.org/forum/ |
|
| Windage Tray https://slantsix.org/forum/viewtopic.php?t=3272 |
Page 1 of 1 |
| Author: | 63GT [ Mon Feb 18, 2002 3:22 pm ] |
| Post subject: | Windage Tray |
Badly in need of a windage tray. Any leads greatly appreciated. Thanks Drew Man,..time's a flyin' I had hoped to be built by now. MoparBrat63@aol.com |
|
| Author: | Tom Gilsdorf [ Mon Feb 18, 2002 5:39 pm ] |
| Post subject: | Re: Windage Tray |
Quote:
: Badly in need of a windage tray. Any leads : greatly appreciated. : Thanks Drew : : Man,..time's a flyin' I had hoped to be built : by now. Copying and pasting a msg from further down the thread. I just bought one from Mike. Super nice guy. Gilly From (dschumer) "Mike was going to be making another run of trays this winter. He may have an extra one laying around. 308-324-3576" tlg225ccr@aol.com |
|
| Author: | 63GT [ Tue Feb 19, 2002 4:48 pm ] |
| Post subject: | Re: Windage Tray |
Quote:
: Copying and pasting a msg from further down the : thread. I just bought one from Mike. Super : nice guy. Gilly : : From (dschumer) "Mike was going to be : making another run of trays this winter. He : may have an extra one laying around. : 308-324-3576" I spoke with Mike aswell, seems you got the last one. He won't have any made up in time for this spring. I need to keep trying to find a used one. MoparBrat63@aol.com |
|
| Author: | dschumers [ Tue Feb 19, 2002 5:28 pm ] |
| Post subject: | Re: Windage Tray |
<A HREF="http://www.moparchat.com/forums/showthr ... d=45282</A> This ad appeared on Moparchat a while back. slantzilla@excite.com |
|
| Author: | 63GT [ Sat Feb 23, 2002 4:46 am ] |
| Post subject: | Re: Windage Tray |
Quote:
: : <A HREF="http://www.moparchat.com/forums/showthr ... d=45282</A> : : This ad appeared on Moparchat a while back. Thanks for the info. I spoke to Dennis at Precision Performance and he needs to know how much clearance there is between stock pan and K-member. Well, my engine has been out for a long time.I never took any measurements.Can anyone help me out by taking some measurements? I supose 63 thru 66 Darts and Vailants should be the same. Please correct me if I'm wrong. Thanks verymuch. Drew 63GT P.S. At the rate I'm going,I don't think I will be ready for April. MoparBrat63@aol.com |
|
| Author: | dschumers [ Sat Feb 23, 2002 2:32 pm ] |
| Post subject: | Re: Windage Tray |
I was under my '66 this morning and it appears to me that there is around an inch all the way around the K-frame. If they are going to build off an existing pan, the early A-body pan is different than the later model ones. The sump is farther back, and the back part over the steering linkage may be shallower. Good luck! Dennis slantzilla@excite.com |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|