| Slant Six Forum https://slantsix.org/forum/ |
|
| timing chain https://slantsix.org/forum/viewtopic.php?t=3286 |
Page 1 of 1 |
| Author: | Mopar Madness [ Thu Feb 21, 2002 2:33 pm ] |
| Post subject: | timing chain |
is there a company that actually makes double roller timing chain sets for the slant six. I plan on putting an aftermarket cam in my slant six, mopar performance cam # P4529342 and that stock plastic cam gear isn't going to cut it. Or is there a company that makes single roller timing chain set that has a steel cam gear with it. I read the slant sickness article, who makes the sealed top gear for the double roller timing chain set that was used. craig_o_connor88@hotmail.com |
|
| Author: | Tom Gilsdorf [ Thu Feb 21, 2002 4:24 pm ] |
| Post subject: | Re: timing chain |
Cloyes offers a double roller set. I bought mine from Clifford Performance (909-734-3310). PN #95-1972 $121. I know I could have gotten it cheaper, but I was ordering some other stuff at the same time. Gilly tlg225ccr@aol.com |
|
| Author: | DusterIdiot [ Thu Feb 21, 2002 8:45 pm ] |
| Post subject: | Re: timing chain *PIC* |
Quote:
: Cloyes offers a double roller set
Do a search on this site, there was a thread on cloyes only offering parts and I ended up with a "dynagear" equivalent. Here's a pic of the one I put on my block 3 weeks ago, the marks on the gears were off so I had to use the Mopar Performance bushing set with the 4 degree bushing to put her back on track during the degree wheel process.... Best of luck. -Duster Idiot 
|
|
| Author: | Charlie Schmid [ Fri Feb 22, 2002 7:46 am ] |
| Post subject: | Re: timing chain |
Quote:
: is there a company that actually makes double : roller timing chain sets for the slant six. : I plan on putting an aftermarket cam in my : slant six, mopar performance cam # P4529342 : and that stock plastic cam gear isn't going : to cut it. Or is there a company that makes : single roller timing chain set that has a : steel cam gear with it. I read the slant : sickness article, who makes the sealed top : gear for the double roller timing chain set : that was used. Give Cox Bros. Performance a call. They carry two different roller timing sets for the Slant Six. One is a double roller set. The other is a true double roller with multi keyed crank sprocket. They also have many other slat six parts. Real nice intake/exhaust gasket, extra thick, and a lot of material around the ports. Solid copper head gaskets, Roller Rockers. Even special connecting rods (expensive, but nice). They also race a 10 second Slant Six powered 66 Dart. Their phone number is 614-268-9920. e-mail <A HREF="mailto:CoxBros66@msn.com">CoxBros66@msn.com</A> I have bought several items frome them. Very nice people. Charlie flturbo6@aol.com |
|
| Author: | Ron [ Fri Feb 22, 2002 4:17 pm ] |
| Post subject: | Re: timing chain |
Charlie is right go to the cox bros. These are real mopar people helping slant/6 racers and are nice people. Until i have to race them then its war Thanks Ron rpracing@catt.com |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|