| Slant Six Forum https://slantsix.org/forum/ |
|
| Replacement throttle cable install..help? https://slantsix.org/forum/viewtopic.php?t=32907 |
Page 1 of 1 |
| Author: | SPWC [ Sat Dec 20, 2008 3:29 pm ] |
| Post subject: | Replacement throttle cable install..help? |
The throttle(accelerastor) cable currently installed on my 72 Swinger Slanty is all frayed and I am afraid it will fail during operation. I recently purchased and recieved another throttle cable(used) off ebay and it was originally on a 76 Scamp V8 car.I put them side by side and it seems the V8 Cable is the same length as the Slant 6 one,so im in good shape there. I checked part numbers online and all the searches only gave me 1 part number for both the V8 and Slant 6 What are the correct techniques and procedures for replacing this Cable? Is it a difficult undertaking,and are there any tips or tricks to making it painless? |
|
| Author: | SlantSixDan [ Sat Dec 20, 2008 3:34 pm ] |
| Post subject: | |
Nope. Don't know which catalogues you're looking at, but the slant-6 1bbl cable is considerably longer than a V8 cable. |
|
| Author: | SPWC [ Sat Dec 20, 2008 4:11 pm ] |
| Post subject: | |
According to Partsamerica.com(Checker) My 72 Dart Swinger 3.2 Liter(198) and a 76 Plymouth Scamp 5.2 Liter(318) both take a Pioneer Parts CA8418 Cable http://www.partsamerica.com/ProductGuid ... ber=CA8418 |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|