| Slant Six Forum https://slantsix.org/forum/ |
|
| Backing Plates https://slantsix.org/forum/viewtopic.php?t=33297 |
Page 1 of 1 |
| Author: | sethmcneil [ Tue Jan 13, 2009 9:31 am ] |
| Post subject: | Backing Plates |
I heard that the backing plates for the 8.25, and the 8.75 are interchangeable. Is this true? |
|
| Author: | Joshie225 [ Tue Jan 13, 2009 10:50 am ] |
| Post subject: | |
What exactly are you trying to do? |
|
| Author: | sethmcneil [ Tue Jan 13, 2009 11:32 am ] |
| Post subject: | |
I'd like to experiment with ducting on another set of backing plates, rather than having my car down too long, and there is a guy locally on craigslist with a set of backing plates from the 8.75. my car has an 8.25. hence the question... |
|
| Author: | slantzilla [ Tue Jan 13, 2009 1:58 pm ] |
| Post subject: | |
As long as they are not A body backing plates you should be fine. The 10X1-3/4 brakes used a different plate I believe. |
|
| Author: | Joshie225 [ Tue Jan 13, 2009 2:36 pm ] |
| Post subject: | |
Quote: I'd like to experiment with ducting on another set of backing plates, rather than having my car down too long, and there is a guy locally on craigslist with a set of backing plates from the 8.75. my car has an 8.25. hence the question...
In that case I'd just get some backing plates from a big bolt pattern 7 1/4. I put 7 1/4 backing plates on my 8 3/4, but it used shortened C-body wagon axles. Like 'Zilla I believe the A-body 8 3/4 backing plates are different.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|