| Slant Six Forum https://slantsix.org/forum/ |
|
| Clifford Headers ID Tube Diemision? https://slantsix.org/forum/viewtopic.php?t=33347 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Fri Jan 16, 2009 2:40 pm ] |
| Post subject: | Clifford Headers ID Tube Diemision? |
What is the Clifford Header Tube Size?? Primary?? Collectors?? I couldn't find this info on their site.. Imagine that. Greg |
|
| Author: | Dart270 [ Sun Jan 18, 2009 7:59 pm ] |
| Post subject: | |
1.5" on the shorties. Probably same on long tubes, but I don't have a set to measure. This is really all you'd ever need on a Slant with 40 cubes/cyl or less. Lou |
|
| Author: | Rick Covalt [ Mon Jan 19, 2009 4:12 am ] |
| Post subject: | size |
I have a new set of long tubes. I'll check them after work tonight and post the size. Rick |
|
| Author: | Greg Ondayko [ Mon Jan 19, 2009 2:15 pm ] |
| Post subject: | |
Cool. Thanks Lou / Rick |
|
| Author: | Dart270 [ Mon Jan 19, 2009 2:19 pm ] |
| Post subject: | |
Oops. I gave you the OD measurement. Sorry, haven't measure ID directly, but I believe it is 16 ga tubing so ID would be 1.5" - 2X0.0625" = 1.38" plus or minus 0.010" in real life. Lou |
|
| Author: | Rick Covalt [ Tue Jan 20, 2009 5:09 pm ] |
| Post subject: | Measurement |
My long tube 60-66 A body Cliffords are 1.5" outside also. Rick |
|
| Author: | Greg Ondayko [ Tue Jan 20, 2009 7:30 pm ] |
| Post subject: | |
Thanks! Greg |
|
| Author: | Joshie225 [ Tue Jan 20, 2009 8:06 pm ] |
| Post subject: | Re: Measurement |
Quote: My long tube 60-66 A body Cliffords are 1.5" outside also.
Same with my '67 and later Clifford long tube headers. 2.5" collectors.
Rick |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|