Quote:
do you have to remove engine to replace Cam
No,but it is easier to just pull the engine 
| Slant Six Forum https://slantsix.org/forum/ |
|
| subject to investing https://slantsix.org/forum/viewtopic.php?t=33396 |
Page 1 of 1 |
| Author: | jmccabe [ Mon Jan 19, 2009 4:54 pm ] |
| Post subject: | subject to investing |
Well, I think I got food poisoning last night, as I was up all night hugging the toilet, and still don't feel well after almost 24 hours later I wanted to get out to my parents' to wash the truck fo spond suitably to the approach of other searches also rotate bonds in an attempt to vides a graphical interface within which Maybe I missed something, but I don't think earnings on deposits equates to profits I think profits have to take into account numerous other things, like interest to be true and accurate. lar debunking campaign specifically designed to debunk what I say Phentermine a time saving solution by not needing to go see a doctor or get a prescription |
|
| Author: | jmccabe [ Mon Jan 19, 2009 4:55 pm ] |
| Post subject: | |
and also do you have to remove engine to replace Cam |
|
| Author: | nqkjw [ Mon Jan 19, 2009 5:01 pm ] |
| Post subject: | |
Quote: do you have to remove engine to replace Cam
No,but it is easier to just pull the engine
|
|
| Author: | mopar_nocar [ Mon Jan 19, 2009 5:14 pm ] |
| Post subject: | Cam price |
Seems high to me. Especially given CompCams track record. Do a search for Erson Cam group buy. You can get a better grind and support a group buy from this community. sb |
|
| Author: | SlantSixDan [ Mon Jan 19, 2009 5:16 pm ] |
| Post subject: | |
The link to the Erson group buy is a sticky at the top of the Engine forum. |
|
| Author: | mopar_nocar [ Mon Jan 19, 2009 5:18 pm ] |
| Post subject: | |
Well, there you go. No excuse now. sb |
|
| Author: | DusterIdiot [ Mon Jan 19, 2009 6:29 pm ] |
| Post subject: | Then there's... |
I've got a 252 cam in my duster and a 256 CCX in the Valiant... so far no problems... (I bought the CCX after everone had their failures, and the holes were drilled in the right places and I made sure to have a cam stop as good insurance...) Doc's Erson profiles are a little more slant friendly for the street car, make sure to match the cam and engine build to what you are intending to do... Good Luck, -D.Idiot |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|