| Slant Six Forum https://slantsix.org/forum/ |
|
| NP435 Transmission Bell Housing https://slantsix.org/forum/viewtopic.php?t=33418 |
Page 1 of 1 |
| Author: | Solotime [ Wed Jan 21, 2009 6:31 am ] |
| Post subject: | NP435 Transmission Bell Housing |
I need to find one. Anybody got one laying around? 1981 Dodge D150 truck, 11 inch clutch, slant 6 obviously. Thanks |
|
| Author: | tophat [ Wed Jan 21, 2009 6:03 pm ] |
| Post subject: | |
Where are you at? That is going to be a heavy thing to ship. Do you just need the bellhousing, or the trans and flywheel too? TopHat |
|
| Author: | Solotime [ Thu Jan 22, 2009 5:04 am ] |
| Post subject: | |
I am in south central kansas, zip code 67152. I just need the bell housing. Rebuilt the engine about a year ago after buying the truck. When I got everything out I noticed the bell housing had been welded. It appeared to be a good repair and since I could not locate one locally at the time I put it back in the truck. Well it failed rather dramatically a couple of weeks ago!!! I have called every yard around here and have not been able to lacate one. |
|
| Author: | 66aCUDA [ Thu Jan 22, 2009 6:10 am ] |
| Post subject: | |
I would PM Rock he may have one. Frank |
|
| Author: | heckshemi [ Thu Jan 22, 2009 11:15 am ] |
| Post subject: | |
I've got one. You can have it for the cost of shipping. |
|
| Author: | nuttyprof [ Sun Jan 18, 2015 8:39 pm ] |
| Post subject: | |
I know it's an old thread but do you still have that np435 bell housing? |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|