| Slant Six Forum https://slantsix.org/forum/ |
|
| Is the erson 280 the right cam. https://slantsix.org/forum/viewtopic.php?t=33667 |
Page 1 of 1 |
| Author: | Mike_64_Valiant [ Sat Feb 07, 2009 2:37 pm ] |
| Post subject: | Is the erson 280 the right cam. |
I have a 64 Valiant 225 3speed manual with A/C. My new head is just about done at the machine shop. Its been heavily ported, 1.70intake 1.44exhaust valves, combustion chambers opened around the valves, milled to give a compression ratio of 9.5 to 1, and lots of different coatings This thing will flow alot more air. The bottom end is stock bore. It will be receiving a offy 4bbl and holley 8007 390cfm carb. Stock exhaust manifold to 2.25 tubing back. I am considering the erson 280 cam. I would like a cam that makes some good torque but I need to keep my A/C living in AZ. Will the 280 be a good choice? |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|