Not even me? Geez Louise, I thought we were friends.
| Slant Six Forum https://slantsix.org/forum/ |
|
| 5 speed swap https://slantsix.org/forum/viewtopic.php?t=33873 |
Page 1 of 1 |
| Author: | sandy in BC [ Fri Feb 20, 2009 6:44 am ] |
| Post subject: | 5 speed swap |
For the couple of folks who PMed me in the last few days about 5 speed swaps: http://www.slantsix.org/forum/viewtopic ... custom+100 You will have to read and dig to get all the info. This is an old swap (9 years?) There are other stronger/more modern ways to do this. The advantage is no floor cutting. I dont have any information or pictures not contained in this post. I dont have the time to walk you through your swap. |
|
| Author: | slantzilla [ Fri Feb 20, 2009 2:19 pm ] |
| Post subject: | |
Not even me? Geez Louise, I thought we were friends.
|
|
| Author: | sandy in BC [ Fri Feb 20, 2009 2:59 pm ] |
| Post subject: | |
I never knew you Three Pedalled.......... |
|
| Author: | DusterIdiot [ Fri Feb 20, 2009 5:48 pm ] |
| Post subject: | Lol... |
Quote: I dont have the time to walk you through your swap.
Oh man! The recession is hitting hard, I thought your tech support number said that you'd walk customer's through the procedure if they paid a bottle a minute in Red Ale....?!?! -D.idiot |
|
| Author: | sandy in BC [ Fri Feb 20, 2009 6:00 pm ] |
| Post subject: | |
You know how it goes...... You do a swap in a week a decade ago.....with what was at hand.....for no money.....because your choices were limited. You get 2 PMs in a day wanting detail and pictures. If I had pictures I would never be able to find them. Detail......detail.....that was smoked over long ago. It would take me just as long the 2nd time. My current gig is disc brakes on 14 bolt GMs (2 sets)....and a spool ...... /7 My favourite question is "where did you find all the parts?" |
|
| Author: | slantzilla [ Fri Feb 20, 2009 7:49 pm ] |
| Post subject: | |
Would you at least run through the Supra head swap again?
|
|
| Author: | sandy in BC [ Sat Feb 21, 2009 8:43 am ] |
| Post subject: | |
Actually BOTH slants get a Supra head....450" V12.....aluminum block of course.... epoxied together with tile cement. Ill use a stock cast crank and DeSoto rods ....anybody make pistons for this? Im worried I may have to buy shorter pushrods.... anybody done this? Is there a kit? |
|
| Author: | slantzilla [ Sat Feb 21, 2009 1:43 pm ] |
| Post subject: | |
Quote: Actually BOTH slants get a Supra head....450" V12.....aluminum block of course.... epoxied together with tile cement. Ill use a stock cast crank and DeSoto rods ....anybody make pistons for this?
I think the K-1 rods will work. They already have the bearing slots on the right side for the Desoto bearings. Im worried I may have to buy shorter pushrods.... anybody done this? Is there a kit? Make sure to use gray tile cement so it looks prettier.  Just cut the pushtubes with a hacksaw and JB Weld them back together. I did that to the ones in my good motor and have never had an issue.
|
|
| Author: | Volare4life [ Sat Feb 21, 2009 10:22 pm ] |
| Post subject: | |
LOL thats funny stuff, the sad/funny thing about it is that Sandy will get a pm or 12 about 450" V12 supra headed slants......... but the possiblity of welding 2 aluminium blocks together is intresting.........* now what did I do with that big 'ol trash bag of money.............* -Mike |
|
| Author: | Dart270 [ Sun Feb 22, 2009 7:21 am ] |
| Post subject: | |
I have $55000 I need to spend quickly. Where can I get all these kits as one package? Lou |
|
| Author: | sandy in BC [ Sun Feb 22, 2009 7:44 am ] |
| Post subject: | |
Now we are laundering money...... I dont do that either .... (is it cash?) Hey put it through the Canadian exchange a few times Lou and it comes back super clean. Your tax rebate burning that big of a hole in your pocket? MJ |
|
| Author: | slantzilla [ Sun Feb 22, 2009 1:18 pm ] |
| Post subject: | |
Quote: I have $55000 I need to spend quickly. Where can I get all these kits as one package?
Please mail it to:Lou Schumers Performance 301 East Lyle Milford, IL 60953 I'll take good care of ya buddy.
|
|
| Author: | Ron Parker [ Sun Feb 22, 2009 7:48 pm ] |
| Post subject: | |
Wow Lou doint send that cash to Bagel, Hotrod is going to bail him out. He is our man. Hey Bagel did you know that John Bill Weld lives close to us.AKA JB Weld. Also on a posivite note Lou And James and Sandy And Me have came up with a secret lube for all purpose Slant Apps. Stay tuned for this product called Possum Paste. Thanks Ron Parker It Aint Over Until I Smoke A Bee Hive |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|