I have a small block one with one hole egged out on mine.
| Slant Six Forum https://slantsix.org/forum/ |
|
| SFI flex plate https://slantsix.org/forum/viewtopic.php?t=33909 |
Page 1 of 1 |
| Author: | bigslant6fan [ Sat Feb 21, 2009 4:22 pm ] |
| Post subject: | SFI flex plate |
Does anyone know of a manafucturer that makes SFI approved S/6-904 flexplates.They have one bolt different then a v-8,so it won,t work.Thanks in advance. |
|
| Author: | 66aCUDA [ Sun Feb 22, 2009 5:51 am ] |
| Post subject: | |
If you REALLY need one have a shop drill the V8 one for the slant pattern(as you say its only 1 hole. Frank |
|
| Author: | Exner Geek [ Sun Feb 22, 2009 7:38 am ] |
| Post subject: | |
The Cox Brothers used to make these up and may still have one for sale. The shop phone number is 614-453-1432. They took a V-8 SFI plate and weled a plug in one hole and drillied a new hole for the slant 6 pattern. If you have the pre-68 crank it would be more complicated. |
|
| Author: | slantzilla [ Sun Feb 22, 2009 1:20 pm ] |
| Post subject: | |
I have a small block one with one hole egged out on mine.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|