| Slant Six Forum https://slantsix.org/forum/ |
|
| springs https://slantsix.org/forum/viewtopic.php?t=3410 |
Page 1 of 1 |
| Author: | Mopar Madness [ Wed Mar 27, 2002 10:11 pm ] |
| Post subject: | springs |
I have just finished rebuilding my slant six head and I got mopar cam PN#4529342 and the recommended springs to go with it. I opened up my cam box and looked at the cam card and it doesn;t list any installed height specs or in seat spring pressures? can anyone help? craig_o_connor88@hotmail.com |
|
| Author: | Doc. [ Thu Mar 28, 2002 12:34 pm ] |
| Post subject: | Re: Valve springs |
Quote:
: I have just finished rebuilding my slant six : head and I got mopar cam PN#4529342 and the : recommended springs to go with it. I opened : up my cam box and looked at the cam card and : it doesn;t list any installed height specs : or in seat spring pressures? can anyone : help? Measure and give us the "free height" of the springs you have, my guess is that the springs should use a 1.7 installed height to give appx 110 # on the seat. DD |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|