Brass plugs replace those things you know nothing about quite nicely.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Getting rid of lean burn wiring ? https://slantsix.org/forum/viewtopic.php?t=34236 |
Page 1 of 1 |
| Author: | 00spy [ Wed Mar 11, 2009 2:53 pm ] |
| Post subject: | Getting rid of lean burn wiring ? |
I am starting to get rid of the wiring for the lean burn system. It looks like the air charge sensor,on the intake, and the coolant temp sensor that is near the thermostat , not the one for the gauge, is mixed in that wiring . My question is, can I just cap them off since the wiring will be gone. Dave |
|
| Author: | sandy in BC [ Wed Mar 11, 2009 3:16 pm ] |
| Post subject: | |
If the wiring is gone you might as well cap them. Stealthy now..... |
|
| Author: | 00spy [ Wed Mar 11, 2009 3:20 pm ] |
| Post subject: | |
I don't know what you are talking about :shrug: |
|
| Author: | Reed [ Wed Mar 11, 2009 4:28 pm ] |
| Post subject: | |
Brass plugs replace those things you know nothing about quite nicely.
|
|
| Author: | 66aCUDA [ Thu Mar 12, 2009 6:47 am ] |
| Post subject: | |
OK your screen name is 00SPY............ Frank 
|
|
| Author: | 00spy [ Thu Mar 12, 2009 2:13 pm ] |
| Post subject: | |
Frank, Isn't that ironic. Thats another story .Back when AOL was about the only thing out there , it was a pain to get a screen name , I finally was able to find one no one was using (C.W.James00spy) which is a song title . I decided to cut it short here ,because that would be confusing. Dave |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|