Hi All

Where can i find a supplier of oem replacement - read restoration - bulkhead connectors for this beast please

had a look at:

YearOne
Mancinni
Paddock
Bluestar Spares
Pentastar Parts
Summit

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Perhaps try searching Mopar bulkhead on Ebay, there are some out there.

_________________
74 Dodge Charger 225 factory A/C auto 1920 carb stock exhaust.

Mods;
HEI, MSD B3, Magnecor 8 mm, ZFR5N, .060 rotor, CH410X cap, new 3874814 dist, fuel mod, valves hot .010 & .020, all new hoses, JP chain, brake hoses and fluid.

Hoogeeze…seems to me I saw a vendor offering those not long ago, now I just need to figure out who it was...I do see a few on eBay.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

I knew of a specific seller on Ebay that was resonable and had all kinds of Mopar connectors including those bulkhead pieces but now I can't find anything on em and the search results does not include that seller...

Here we go...

Ebay Seller Hoover Auto Parts rob 1426

_________________
74 Dodge Charger 225 factory A/C auto 1920 carb stock exhaust.

Mods;
HEI, MSD B3, Magnecor 8 mm, ZFR5N, .060 rotor, CH410X cap, new 3874814 dist, fuel mod, valves hot .010 & .020, all new hoses, JP chain, brake hoses and fluid.

About 15 months ago, I purchased a complete NOS (all four sections) bulkhead connector for my 1967 Dart from Evans Wiring Harnesses, 8835 Parson Rd., Erie, PA 16509. I have misplaced his phone number.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

thanks for the replies so far guys as an interim i got a reasonable neat set of another 68 - will keep my eyes peeled - one guy on epay wants 150ish USD for all four pieces plus new spade connectors

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Yeah thats seems real high. I thought I got reamed at Mopars at the Strip several years ago but if memory serves me right I only paid (only LOL) 220.00 for the bulkhead, the 3 specific connectors, the related spades as well as both battery cables... This was for my 67 Dodge Charger which I no longer have.

_________________
74 Dodge Charger 225 factory A/C auto 1920 carb stock exhaust.

Mods;
HEI, MSD B3, Magnecor 8 mm, ZFR5N, .060 rotor, CH410X cap, new 3874814 dist, fuel mod, valves hot .010 & .020, all new hoses, JP chain, brake hoses and fluid.

The gentleman who gave me this part actually gave me a complete 68 cuda harness in amazingly good condition 5 wires need replacement - the last 4 inches to the left headlight - strangely the connectors are intact and the wire running to the starter relay - these wires seem to have been exposed to heat, not overheated due to a short

wire is pliable connectors clean

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars