| Slant Six Forum https://slantsix.org/forum/ |
|
| Torsion bars https://slantsix.org/forum/viewtopic.php?t=34430 |
Page 1 of 1 |
| Author: | NewSlanter [ Sat Mar 21, 2009 8:25 pm ] |
| Post subject: | Torsion bars |
Going to pick up a set of 892/893 torsion bars tomorrow. Should be a direct swap for the old ones yes? Or is there a gotcha? They are year/model appropriate. Thanks in advance, Nat |
|
| Author: | SlantSixDan [ Sat Mar 21, 2009 8:28 pm ] |
| Post subject: | |
Yep, all A-body torsion bars are interchangeable. Make sure to put the left bar on the left, and the right bar on the right. |
|
| Author: | NewSlanter [ Sat Mar 21, 2009 8:29 pm ] |
| Post subject: | |
Ok, is the odd number for the port or starboard side? |
|
| Author: | SlantSixDan [ Sat Mar 21, 2009 8:49 pm ] |
| Post subject: | |
With paired parts on a Mopar, the even-number part goes on the starboard side, the odd number to port. |
|
| Author: | slantvaliant [ Sun Mar 22, 2009 10:29 am ] |
| Post subject: | |
Aye, matey! And fore and aft make no difference. Unless you want to leave some possibility of seeing the number through the rear socket ... |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|