| Slant Six Forum https://slantsix.org/forum/ |
|
| Rear End Cover Gasket?? https://slantsix.org/forum/viewtopic.php?t=34656 |
Page 1 of 1 |
| Author: | Joe Colby [ Thu Apr 02, 2009 1:52 pm ] |
| Post subject: | Rear End Cover Gasket?? |
My local NAPA guy doesn't have a gasket for the 9 bolt rear on my 62. Is there another parts place that has them or would it be a Chrysler part? I hate to just put spooge on with out a gasket. Thanks. Joe |
|
| Author: | sandy in BC [ Thu Apr 02, 2009 2:07 pm ] |
| Post subject: | |
A lot of folks just use the RTV..... Any of the big gear places have them. You can make your own quickly and easily with a small ball peen hammer and gasket stock. |
|
| Author: | Joe Colby [ Thu Apr 02, 2009 4:43 pm ] |
| Post subject: | |
A ball peen hammer and gasket stock?? You'll have to walk me through this. Joe |
|
| Author: | emsvitil [ Thu Apr 02, 2009 9:10 pm ] |
| Post subject: | |
I got a 7 1/4" gasket from rockauto..... |
|
| Author: | 65Dodge100 [ Thu Apr 02, 2009 9:48 pm ] |
| Post subject: | |
Hey Joe, Here is a video of what Sandy is talking about. http://www.youtube.com/watch?v=6rx5hGKt1PY Danny |
|
| Author: | Joe Colby [ Fri Apr 03, 2009 3:32 am ] |
| Post subject: | |
Excellent video. Now I get it. I'm not sure if I can lay on a creaper and do it as nicely as the video. If I can't find a gasket it would be worth a try. Thanks. Joe |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|