Have you fired that little beast of yours up yet?
Lot's of time till Saturday!
CJ
| Slant Six Forum https://slantsix.org/forum/ |
|
| Well Fopar? https://slantsix.org/forum/viewtopic.php?t=35096 |
Page 1 of 1 |
| Author: | ceej [ Tue Apr 28, 2009 8:49 am ] |
| Post subject: | Well Fopar? |
Have you fired that little beast of yours up yet? Lot's of time till Saturday! CJ |
|
| Author: | Fopar [ Tue Apr 28, 2009 4:32 pm ] |
| Post subject: | |
Not yet, have to finish the exhaust, and the rest of the plumbing 
|
|
| Author: | ceej [ Tue Apr 28, 2009 9:29 pm ] |
| Post subject: | |
Want some company tommorow evening for the cam run in?  CJ |
|
| Author: | Fopar [ Tue Apr 28, 2009 9:48 pm ] |
| Post subject: | |
Might get it running tomorrow, but don't need to do a cam run in as it is the old cam and lifters from the Ford. The lifters were put in order that they were in originally. It is the Comp 264 that I had run for so many years. |
|
| Author: | ceej [ Wed Apr 29, 2009 2:16 pm ] |
| Post subject: | |
Ah. I thought your were going to put new ones in. I'd like to be on hand when you light it off for the first time! Give me a call this afternoon. I'm thinking it will sound unique!  CJ |
|
| Author: | runvs_826 [ Thu Apr 30, 2009 7:34 pm ] |
| Post subject: | |
Which car is this? The Dart? Hopefully I can give you guys a run for your money this year. Big Erson cam, new injectors, new ignition.
|
|
| Author: | Fopar [ Thu Apr 30, 2009 7:53 pm ] |
| Post subject: | |
Yes, it's the Dart "6 PAC TO GO" I have to change all wheel cylinders, put new brake lines on the 8 inch, and mount the seat. I have new flex hoses on the brake system along with the 2 pot master cylinder. |
|
| Author: | ceej [ Sat May 02, 2009 3:21 pm ] |
| Post subject: | Here's a nice picture I took! |
 Nice installation Richard! CJ |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|