| Slant Six Forum https://slantsix.org/forum/ |
|
| What is proper flex plate to TC bolt size? https://slantsix.org/forum/viewtopic.php?t=35187 |
Page 1 of 1 |
| Author: | wjajr [ Mon May 04, 2009 8:26 am ] |
| Post subject: | What is proper flex plate to TC bolt size? |
PTC sent me the wrong size flex plate to torque converter 7/16" bolts that are too big. Foiled again for a few more days to get this car back together. To be fair PTC is sending out to me the correct bolt today PP shipping. I have seen two different sizes listed for this application from various suppliers: 5/16" x 20 x 0.490" long; and 5/16" x 24 x 0.490" long. This fastener size is not listed in the FM, or my Torqueflite A-727 Transmission Handbook by C.H. Munroe, which size is correct? |
|
| Author: | Joshie225 [ Mon May 04, 2009 9:26 am ] |
| Post subject: | |
Are you sure the torque converter doesn't take 7/16" bolts? My PTC converter does so I had to drill out the flex plate. |
|
| Author: | slantzilla [ Mon May 04, 2009 2:33 pm ] |
| Post subject: | |
Stock converters use 5/16"X24. Aftermarket converters can have 5/16" or 7/16". My Midwest converters are one of each. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|